博文

目前显示的是 八月, 2014的博文

How to Replace a warehouse light by LED high bay light

图片
How to Replace a warehouse light by  LED high bay light ? 1. Check the working voltage before place an order, make sure the working voltage suitable for your warehouse. Mostly 85-265VAC enough, but different country have different working voltage, even same country have different working voltage for different application. Such as USA, home lighting usually consider to 120VAC, but industrial lighting consider to 277VAC or 480VAC, some also need 250VDC. It is very different. So check your working voltage before you purchase any replacement energy saving LED lights for your warehouses. 2.  Now you get a LED high bay light with good brightness, correct working voltage, then we start use a LED high bay light to replacement traditional warehouse lighting fixtures. Turn off the power to the switch at the main circuit breaker of fuse box. Test by flipping the switch on to make sure the power is off.  3.  With a screwdriver, loosen the four screws from the high bay light heat sin

How can I replace Metal Halide high bay light?

图片
How can I replace Metal Halide high bay light ?   Metal halide high bay lighting fixture is the leading source of industrial illumination, such as warehouse lighting, factory workshop lighting, shopping center, mining lighting, retail store, etc. They are very popular in both industrial and commercial in today’s word.    All of us knows that metal halide high bay light is not cheap, sometimes even very expensive with some famous brand. The cost of electrical consumption, light bulbs, ballast, labor and often times lift fees can be very tolling to a businesses bottom line.   In the past few years most warehouse lights using Metal Halide high bay lighting fixture, the lifespan of metal halide usually consider to 20000hrs, but more than 50% failed or low lumen after 10000hrs, that means metal halide HID lamp becomes older and failed.    In that case, the Metal halide lamp failed in work or low lumens, it is necessary to retrofit warehouse by new energy saving lights. LED

How to cut your annual energy with LED high bay lights?

图片
How to cut your annual energy by 50% or more with LED high bay lights? How to reduce HPS high bay lighting cost by over 50% with LED high bay light ? In the past years, High pressure sodium(HPS) lamp is the leading source of industrial illumination many decades. We can see High pressure sodium(HPS) high bay light fixture installed everywhere which produced by Philips , Osram and...   In China, We can see HPS high bay used in factory, warehouse, shopping mall, gymnasium center. Some owners still do not realized the important of energy saving. Due to they do not know how much money they can save from lighting cost.   Currently, we handle with a warehouse with 89pcs 250Watt High pressure sodium(HPS) lamp high bay light fixtures., light on 16hours per day   How many wattage that 250W HPS high bay actual used? 250W High pressure sodium(HPS) lamp high bay light fixture actual use 290Watts   According to our customer’s project information, lux level request, we coul

TEK GX24Q-3 LED Corn cob lamp replaced 26 Watt 4 Pin GX24q-3 CFL Compact Fluorescents

图片
TEK LED Corn cob lamp  replaced CFL Compact Fluorescents 4Pin GX24q-1, GX24q-2, GX24q-3, GX24q-4,E26, E27 Base TEKLED  9W GX24Q-3 LED corn lamp  replaced 26 Watt 4 Pin GX24q-3 CFL Compact Fluorescents TEK GX24Q-2 LED Corn cob lamp replaced Philips MASTER PL-T 18W/830/4P 1CT    TEKLED 12W GX24Q-3 LED corn lamp replaced 32Watt 4 Pin GX24q-3 CFL Compact Fluorescents 12W LED corn light replacement 32W CFL bulb in USA

What is a LED high bay light?

图片
What is a LED high bay light? LED high bay light  is made of replace industrial high bay and low bay lighting fixtures, which using LED as light source. TEKLED started LED lights business from 2008, which specialized in industrial  LED high bay lighting  developing and manufacturing, all LED high bay light provide 3 year factory warranty! Where to use LED high bay light? TEK LED high bay lighting has the advantage of high  intensity and excellent   heat dissipation. It can be widely used in outdoor and indoor lighting projects as   emporiums ,  billboards , warehouses, gyms, parking lots How to distinguish between good and bad LED high bay? The most difficult to overcome of which is the heat dissipation problem of LED lights.  TEK  LED high bay light  use Fin-style heat sink with heat-pipe design, which is much better for heat dissipation than normal alloy die-casting heat sink, and thous extends the working life of LED high bay lights. What traditi

How to replacement High pressure sodium(HPS) lamps?

How to replacement  High pressure sodium(HPS) lamps ? High  pressure  sodium (HPS)  lamp is the leading source of  industrial  illumination . Traditional street light, warehouse light, factory light, garden light, parking lot light usually use high pressure sodium lamps, it will reduce the strength when working in burning environment and damage the bulb very easy by slight shake. And the  High  pressure  sodium (HPS)  lamp  driven by traditional electromagnetic ballast usually suffer from high current stress on lamp ’ s electrodes during start up stage. In view of the  High  pressure  sodium (HPS)  lamp  with a high power consumption for both HPS bulb and ballast.  How to  replacement  High  pressure  sodium (HPS)  lamp  by a energy saving light? TEK LED corn light bulb is the best choice to replacement HPS bulb without change lighting fixture and socket. LED corn light  with advantage of 60W as well as  High  pressure  sodium (HPS)  lamp  of 250W, while the ener

The advantage of LED corn light

The advantage of  LED corn light In the past years,  High voltage sodium lamp is the leading source of  industrial  illumination  w hich are widely used in both commercial and industrial lighting. Until today, The  High pressure sodium(HPS) lamps  is the style leader in the industrial lighting  in factory, warehouses, hall, gym, exhibition center and street lights . Traditional ballast components of inductance ballast has some disadvantages which   include large volume, high self consumption, low power factor and difficult to   adjust.   High pressure sodium(HPS) lamps driven by traditional electromagnetic ballast   usually suffer from high current stress on lamp's electrodes during start up stage. Traditional  high bay warehouse  lamps will use incandescent and high voltage sodium lamp. It will reduce the strength when working in burning environment and damage the bulb   very easy by slight shake.   In view of the disadvantage of  High pressure sodium(HPS) lamps .