博文

目前显示的是 2016的博文

Use LED high bay light to upgrading furniture factory 400W metal halide high bays

图片
I am interested to change my furniture factory lights with LED lights. What your recommend to use if our lights are 5-6 meter high and its furniture factory where workers make montage and other job not just warehouse.

Our room is 24 x 36 meters. 6 meters high  are to constructions, but to ceiling more 2 meters. Total height is 8 meters where we can but lights, what is better to use higher or lower place for lamps?
What can we do? 
First, we need to know the standard lux level for furniture factory. We can study from industrial lux level standards for furniture factory, it is 300-500lx for workshop lighting, 150lx for warehouse lighting.
Second, use lighting simulation software DiaLux or DiaLux EVO to make a lighting simulation for the furniture factory. If customer could provide dwg file for the construction will be perfect, if no, we already get the information, also could work.

Total 20pcs 400W metal halide high bay in current furniture factory. Use 150W LED high bay light simple poi…

Microwave motion sensor LED high bay light

图片
The microwave sensor LED high bay light is innovative motion detector with HF system 5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials. Except the higher mounting height 15 meters Max. The sensors allow energy saving without compromising comfort.

Introduction:
ØAutomatic dimming when used in combination with 1-10V dimmable LED drivers or ballasts ØBuilt-in adjustable daylight sensor. Ø1-10V interface can match up with Merrytek stand-alone day light sensor TEK dimming and achieve daylight harvesting ØDetection area, time delay and daylight threshold can be precisely set via DIP switch ØWide detection area, range up to 16m diameter and mounting height 15m max., suitable for warehouse use ØMounting bracket and SS304 train optional for different applications The microwave sensor LED high bay light is innovative motion detector with HF system 5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials. Except the higher mounting height 15m Ma…

UFO LED HIGH BAY LIGHT--Free Shipping

图片
UFO LED high bay light
High luminous efficiency up to 130lm/W
5 years warranty
Fast delivery 1-2 days for sample, 1-5pcs free shipping in the US.
ETL & DLC listed, FCC, SAA, RoHS certificates
100W UFO LED high bay light replacement for 250W HID
150W UFO LED high bay light replace 400W MH high bay
240W UFO LED high bay light replacement 600W HPS


DALI LED High Bay Light

图片
What is DALI?
DALI is a two-way communication system that brings digital technology to lighting. It is an international Standard lighting control system providing a single interface for all electronic control gears (light source) and electronic control devices( lighting controllers)
What is the benefits for using DALI LED high bay lights?DALI offers several particular benefits comparing to other lighting control systems. DALI offers easy planning, lower costs and interoperability. It is the most flexible and reliable control system for innovative lighting solutions. 
DALI LED High Bay Light 5 Years full performance warranty Universal input voltage (90-305VAC, 50-60Hz) High luminous efficiency up to 150lm/W Available in 60/90/120 beam angle. High CRI OF Ra>80, supper color rendition index compared to HPS, MH, HPS, and MV Directly replacement for conventional 250W AND 600W HID Fast delivery 1-2 days for sample, and 7-10 days for bulk order

LED high bay light replace 400W MH high bay in factory

图片
Project: 150W LED high bay light replacement 400W metal halide high bay lighting fixtures The Expectation Customer want to use industrial LED lights to replacement current 400W high bay lighting fixtures in workshop. The luminaire install in a 9 meters high ceiling, consider to the high cost of maintenance for replace lamp and ballast, customer searching for a long lifespan LED lights to replacement current 400W GE lighting high bay lighting fixtures. The situation Luminaire before: GE lighting 400W Metal Halide lamp, high bay lighting fixture with ballast. (Lamp model: KRC400/D/VBU/960 metal halide ) Lamp standard data sheet: Lamp type: 400Watt Metal Halide
installation Height: 9 meters high  The solution According to customer current lighting information, we got the lamp model from the picture and checked the datasheet, lamp power consumption 405.66W, 23500lm,effective luminous flux 16450lm. lamp need to run with ballast, whole lighting system power consume 460W.  We prefer to recommend…

Simple point-to-point replace 250W HPS high bay lighting fixtures

图片
Are you looking for a LED high bay light simply to replacement existing 250W HPS high bay?
Choose TEK 100Watt LED high bay lights, simple point-to-point replacement 250W high bay lighting fixtures, remove the old lighting fixtures from current hook, simply hang  up TEK 100W LED high bay light in existing grid. Correct connect with the wires, so easy. LED high bay lights used to install in a high ceiling, maintenance very inconvenience. TEK lighting provide 5 YearS warranty for lighting fixture, you do not need to worry about maintenance.

100W LED High Bay Features:     5 years Warranty                                  High Efficacy: 125lm/Watt Excellent color rendering: Ra>80(Compliance with EN-12464-1) Simple point-to-point replace 250W Metal halide or High Pressure Sodium high bay lighting fixtures UL Meanwell driver
100W LED high bay lights specifications: Model: TEK-IL-100W Input Voltage: 90-305VAC/50-60Hz Light source: Replaceable Philip LED Power(+/- 5%): 100W Luminous flux: 12…

Why you need to replacement metal halide lamp by LED high bay light?

1. Save electricity cost

Electricity expenses are an important consideration. what is the power consumption for a 400Watts HID high bay lighting fixture? 460Watts
We want to know what wattage LED high bay light could replacement 400W HID high bay, 150Watt LED high bay light equivalent to 400W MH high bay lighting fixture. Now, we need to know the power consumption of 150W LED high bay light, 153Watts
More than 2/3 less energy by use LED high bay light to get a higher brightness.

2.  Save maintenance cost

It's durable and maintenance free. High bay lights used to install in a 6-12 meters high workplaces, maintenance very inconveniently. In some countries, replacement lights need an electrician, and rent a safety lift. As everyone knows, light emitting diode lifespan reach to 10,0000hrs. So we need to solve the heat dissipation and driver lifespan. TEK's 150W LED high bay light use 7 year guarantee Meanwell driver, and unique copper heat-pipe designed heat sink to achieve maximum…

Lumen Maintenance

For LED light sources, LM-80 defines lumen-maintenance life as “the elapsed operating time at which the specified percentage of the lumen depreciation or lumen maintenance is reached, expressed in hours.” 

Rated Lumen Maintenance Life:Rated lumen-maintenance life is measured in hours with associated percentage of light output, noted as Lp. In other words, L70 of 30,000 hours means that the tested LEDs produce 70% of the initial light output at 30,000 hours. If an LED has L50 of 30,000 hours, its lumen output decays faster than one with L70 of 30,000 hours.

LM80:
LM-80 is a testing procedure on the lifespan of LED light source. It’s an IESNA document that the manufacturers must follow to test the lifespan of their LEDs. Basically it tells you how the LEDs must be tested and what information must be included in the LED lifespan report.

LED high bay light used in mechanical workshop

图片
Today, my customer send me some pictures about 200W LED high bay lights used in his new mechanical workshop.

This project mechanical lighting project located in Qingdao, a coastal city in East China's Shandong Province.

Before that, they had another four workshop using 400Watt HID high bay lights before, and now, this is a new mechanical workshop lighting project, the factory owner Mike want to reduce cost of power consumption. They made a lot of search and tested some samples.

The cost of samples are not cheap, usually TEK Lighting prefer to get all detail information from customer, and then make a lighting solution to customer according to their requirements.

The Expectation:
Project:120x48m mechanical workshop lighting; 300lx
The LED highs install in a height over 11m high ceiling, installation height 9.5meters high, consider to the maintenance inconveniently, there is necessary to choosing a good quality LED high bay light with high lumen output.

The Solution:
 According to ligh…

How to choose a right LED lights for your hangar project?

图片
Project: 1750 Square-meters hangar construction lighting The Expectation: Customer want to use10-15pcs 500W LED high bay light to achieve 300lux for hangar lighting, reduce Carbon dioxide emission, cut down maintenance cost and save energy bill. Installation height:7.5 meters The solution: In view of 500W LED high bay light cost high, we check our 200W LED high bay light for our customer. According to the lighting simulation, 200W LED high bay light is a better choice for hangar project. Also copper heat pipe heat sink design as 500Watt LED high bay lights, smart lamp thermal management, 5 years warranty.
Total 30pcs LED high bay light 200Watt for this hangar construction, 330lx, no dark area. Save money, and only 60.36kWh/day (Base on operation 10hrs per day)


The return on investment is around 14 months after installation of LED high bay light on your hangar project.
Looking for a manufacturer to provide you a comprehensive one-stop solution for your hangar project? Send us detail informat…

Looking for a LED high bay lamp replacement 250W MV lamp

图片
TEK LED corn lamp 80-Watt is ideal to replacement 250W MV lamp in high bay lighting fixtures. Save energy and maintenance cost, TEK's LED corn lamp last at least 50,000hrs. "I am looking for a LED lamp to replacement C/W 250W MV lamp for current high bay industrial luminare with vertical lamp IP23 body and parabolic ventilated reflector. " customer said. TEK LED corn lamp 80-Watt is ideal to replacement 250W MV lamp in high bay lighting fixtures. Save energy and maintenance cost, TEK's LED corn lamp last at least 50,000hrs. " I am looking for a LED lamp to replacement  C/W 250W MV lamp for current high bay industiral luminare with vertical lamp IP23 body and parabolic ventilated reflector." Customer said Lamp: Philips Mercury Vapor 250-Watt High Pressure HID light bulb
Brightness: 11,200 LumensEnergy used: 250-Watt CRI:52Lumens per Watt: 52Mogul base  We recommend our customer use mogul base LED corn lamp 80Watt to repalcement 250W HID bulb. Lamp: 80W TEK LED c…

Why use LED lights for your factory?

My best friends call me today, she said his husband opened a mechanical factory, his husband is planning to use 100pcs 58Watt fluorescent tube in his factory, she asked me, can you provide any good lighting solution for his factory?
I have checked with for her by DiaLux to calculate the lighting for her. And then check the ROI to her as well.
3000 square meters wide factory, 4 meters high ceiling. We checked for him, they could use 24pcs 100W high brightness LED high bay lights for his factory, he can get back his invest for new LED high bay lights within 6 months. Due to the industrial electrical fee is very high in China, $0.27/kWh.
LED high lights designed with copper heat pipe for heat management, which is the best solution for heat dissipation, LED light source heat fast transfer to heat sink, well control a low junction temperature to extend LED's lifespan. 
But to be a friend, I just told her LED lights is the best choice for new factory. 




Searching for a 400W wallpack equivalent LED wall light?

图片
Looking for LED light to replacement 400W HID wall pack light? TEK Lighting is a leading LED lighting manufacturer offers wallpack LED lighting solution for outdoor applications.

IP65 designed LED wall packing light 120Watt perfect to replacement 400W MH wall pack.

Outdoor 120W LED wall light

TEK LED wallpack light 5 years warranty IP65 suitable for outdoor applications UL listed Meanwell driver Cree LED

Offce lighting--LED panel light

图片
What's kind of office lighting do you have in your office? T8 office lighting fixture like that?


Traditional 4*18W T8 tube in 600X600X80mm office lighting fixture was widely used in office working area. Mostly using T8 or T5 fluorescent tube in recessed lighting fixture. Few years ago, T8 tube is very popular to replacing conventional fluorescent tubes. It is not easy to replacement fluorescent tube to LED tube, because fluorescent tubes have ballast, most LED tube incompatible with ballast.

Today,  you can use LED panel light in your office, uniformity lighting, high brightness, excellent color rendering, easy installation.

36W LED panel light in Shenzhen, China


Which LED high bay lighting fixture could replacement 1500Watt MH?

图片
LED high bay light seemingly everywhere right now, osram, Philip, and ge lighting all launching their own branded LEDhigh bay lighting fixtures. Which brightness and lux level suitable for your project? And which is the best choice?
High power HID lamp use a lot in the past years in so many applications, as aircraft maintenance hanger, auto-workshop, mechanical shop, stadium, exhibition center, and etc.
Is it necessary to replacement HID lamp lighting fixtures? Of course! HID lamp lifespan 3000hrs or 8000hrs. Mostly failed to work within 18 month in normal running, so you have to retrofit lamp frequently. But due to the lamp install in a high ceiling 15-30meters high, you have to have 3 workers and a lift, that means you replacement a failed lamp cost very high. The lifespan of LED high bay light base on 50,000hrs. More than 16 times longer compared with metal halide lamps. You can saving a lot of money on maintenance.
TEKLED use unique dissipation technology which available to produce …

E40 200W LED high bay light

图片
E40 base 200Watt LED high bay lighting
Transformers series LED high bay light features: 5 Years Warranty LED high bay lighting fixture Nichia LEDS with High Efficacy>125lm/W Copper heat-pipe designed heat sink, excellent heat dissipation design Excellent color, high CRI-Ra>80 No lead, mercury, UV or IR radiation with low heat Operation temperature: -40 to 50 degrees Celsius 25° 60° 90° 100° 110°,total six size of the scale-type reflector available CE & RoHS certified, comply with ETL, UL, CUL, SAA, FCC and TUV Five easy installation methods: Tube, Ring, Hook, E40 thread base, Angle adjustable trunnion bracket  Technical specification Model TEK-IL-100W-T Rated Power 100Watt Luminous Flux >12000lm (@5000K; Ra>80) LED Quantity 100PCS Nichia 3030 LEDs Input Voltage 90-300VAC Operating Frequency 50/60Hz Power Efficiency >0.95 LED Luminous Efficacy >130lm/Watt Lamp Efficacy >110lm/Watt LED Color Warm white/ Nature white/ Day white/ Cool White CCT 3000-3500K/4000-4500K/5000-5500K/6000-65…

How to choosing the right energy saving corn LED lamp to replace mercury lamp?

图片
Brightness—Making sure it’s bright enough Obviously, the first factory that comes to mind when we think of a bulb’s performance is brightness. Shop for lumens, not watts, same watts higher lumen output is better. Watt are a measure of how much energy the bulb draws, not its brightness. For example: A 125W HWL mercury lamp will output 1625 lumens, A 120W LED corn light will output 16530 lumens, taking a look at efficacy, which is simply found by dividing the lumen output by the wattage necessary to power the bulb, the mercury lamp outputs 13lm/W while the LED corn bulb achieved 130lm/W. LED corn light also are rated by watts. But that’s no help because there’s no easy way to compare LED watts with HID, MH, HPS, and CFL lamp’s watts. Here isn’t a uniform way to convert traditional lamps’ watts to LED watts. Now, instead of watts, use lumens as the yardstick of brightness. Packing on LED bulbs rates brightness in lumens ( and in watts). To replace a 250W mercury lamp, look for an LED corn…